HazMat Tool

Load, Transport und Storage of Hazardous Materials
regarding U.S-Hazardous Materials Regulations (49 CFR)

Deutsch | English
Desktop | Mobile

Anonymous session: logout
register for free | Login

Bugs / Feedback? | Advertise

Extracts, flavoring, liquid  
( Comments)

Data from the Hazardous Materials Table

Source: Title 49 CFR 172.101 - Hazardous Materials Table (January 2014)

(3) Hazard Class

3
Flammable liquids

(4)
Identification number

UN 1197

(5)
Packing Group

III

More than one packing group is indicated for this entry. Criteria for assignment see 49 CFR §173 Subpart D

(6)
Labels

(3)

(7)
Special Provisions (§172.102)

Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.

B1If the material has a flash point at or above 38 °C (100 °F) and below 93 °C (200 °F), then the bulk packaging requirements of §173.241 of this subchapter are applicable. If the material has a flash point of less than 38 °C (100 °F), then the bulk packaging requirements of §173.242 of this subchapter are applicable.

Browse special provision B1

IB3Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2).
Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130 kPa at 55 °C (1.3 bar at 131 °F) are authorized, except for UN2672 (also see Special provision IP8 in Table 2 for UN2672).

[Large packaging authorizations]

IB3Authorized Large Packagings (LIQUIDS)
(PG III materials only)2
Inner packagings:Large outer packagings:
Glass 10 litersteel (50A).
Plastics 30 literaluminum (50B).
Metal 40 litermetal other than steel or aluminum (50N).
rigid plastics (50H).
natural wood (50C).
plywood (50D).
reconstituted wood (50F).
rigid fiberboard (50G).

2Except when authorized under Special Provision 41.

Browse special provision IB3

T2see 49 CFR §172.102
TP1The maximum degree of filling must not exceed the degree of filling determined by the following:

Where: tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling.

Browse special provision TP1

 

(8)
Packing Authorizations (§173.***)

(8A) Exceptions150see 49 CFR §173.150
(8B) Non-bulk203see 49 CFR §173.203
(8C) Bulk242see 49 CFR §173.242

(9)
Quantity Limits

(9A) Passenger aircraft/rail60 L
(9B) Cargo aircraft only220 L

(10)
Vessel stowage

(10A) Location

A

Stowage category “A” means the material may be stowed “on deck” or “under deck” on a cargo vessel or on a passenger vessel.

Source: 49 CFR §172.101(k)

(10B) Other n/a

Extracts, flavoring, liquid #2  
( Comments)

Data from the Hazardous Materials Table

Source: Title 49 CFR 172.101 - Hazardous Materials Table (January 2014)

(3) Hazard Class

3
Flammable liquids

(4)
Identification number

UN 1197

(5)
Packing Group

II

More than one packing group is indicated for this entry. Criteria for assignment see 49 CFR §173 Subpart D

(6)
Labels

(3)

(7)
Special Provisions (§172.102)

Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.

149When transported as a limited quantity or a consumer commodity, the maximum net capacity specified in §173.150(b)(2) of this subchapter for inner packagings may be increased to 5 L (1.3 gallons).

Browse special provision 149

IB2Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1).
Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 °C (1.1 bar at 122 °F), or 130 kPa at 55 °C (1.3 bar at 131 °F) are authorized.

Browse special provision IB2

T4see 49 CFR §172.102
TP1The maximum degree of filling must not exceed the degree of filling determined by the following:

Where: tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling.

Browse special provision TP1

TP8A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when the flash point of the hazardous material transported is greater than 0 °C (32 °F).

Browse special provision TP8

 

(8)
Packing Authorizations (§173.***)

(8A) Exceptions150see 49 CFR §173.150
(8B) Non-bulk202see 49 CFR §173.202
(8C) Bulk242see 49 CFR §173.242

(9)
Quantity Limits

(9A) Passenger aircraft/rail5 L
(9B) Cargo aircraft only60 L

(10)
Vessel stowage

(10A) Location

B

Stowage category “B” means
  • (i) The material may be stowed “on deck” or “under deck” on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length; and
  • (ii) “On deck only” on passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this section is exceeded.

Source: 49 CFR §172.101(k)

(10B) Other n/a

Segregation and Separation Chart for Load, Transport, Storage

In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR § 177.848.

Hazard Class
8
7
6.1
5.2
5.1
4.3
4.2
4.1
3
2.3B
2.3A
2.2
2.1
1.6
1.5
1.4
1.3
1.1/1.2
1.1/1.2
                  
1.3
                 
1.4
                
1.5
               
1.6
              
2.1
             
2.2
            
2.3A
           
2.3B
          
3
         
4.1
        
4.2
       
4.3
      
5.1
     
5.2
    
6.1
   
7
  
8
 

  May not be loaded, transported, or stored together in the same transport vehicle or storage facility.
  Load, transport, storage together is not restricted.
  Load, transport, storage together is allowed under restrictions.






Discussion

comments powered by Disqus