HazMat Tool

Load, Transport und Storage of Hazardous Materials
regarding U.S-Hazardous Materials Regulations (49 CFR)

Deutsch | English
Desktop | Mobile

Logout Session

Bugs / Feedback?

Nitrates, inorganic, n.o.s.  
( Comments)

Data from the Hazardous Materials Table

Source: Title 49 CFR 172.101 - Hazardous Materials Table (January 2014)

(3) Hazard Class

5.1
Oxidizers

(4)
Identification number

UN 1477

(5)
Packing Group

III

More than one packing group is indicated for this entry. Criteria for assignment see 49 CFR §173 Subpart D

(6)
Labels

(5.1)

(7)
Special Provisions (§172.102)

Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.

IB8Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N); Rigid plastics (11H1, 11H2, 21H1, and 21H2); Composite (11HZ1, 11HZ2, 21HZ1, and 21HZ2); Fiberboard (11G); Wooden (11C, 11D and 11F); Flexible (13H1, 13H2, 13H3, 13H4, 13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2).

[Large packaging authorizations]
IB8Authorized Large Packagings (SOLIDS)
(PG III materials only)2
Inner packagings:Large outer packagings:
Glass 10 kgsteel (50A).
Plastics 50 kgaluminum (50B).
Metal 50 kgmetal other than steel or aluminum (50N).
Paper 50 kgflexible plastics (51H).1
Fiber 50 kgrigid plastics (50H).
mnatural wood (50C).
mplywood (50D).
mreconstituted wood (50F).
mrigid fiberboard (50G).

1Flexible plastic (51H) Large Packagings are only authorized for use with flexible inner packagings.
2Except when authorized under Special Provision 41.

Browse special provision IB8

IP3Flexible IBCs must be sift-proof and water-resistant or must be fitted with a sift-proof and water-resistant liner.

Browse special provision IP3

T1see 49 CFR §172.102
TP33The portable tank instruction assigned for this substance applies for granular and powdered solids and for solids which are filled and discharged at temperatures above their melting point which are cooled and transported as a solid mass. Solid substances transported or offered for transport above their melting point are authorized for transportation in portable tanks conforming to the provisions of portable tank instruction T4 for solid substances of packing group III or T7 for solid substances of packing group II, unless a tank with more stringent requirements for minimum shell thickness, maximum allowable working pressure, pressure-relief devices or bottom outlets are assigned in which case the more stringent tank instruction and special provisions shall apply. Filling limits must be in accordance with portable tank special provision TP3. Solids meeting the definition of an elevated temperature material must be transported in accordance with the applicable requirements of this subchapter.

Browse special provision TP33

 

(8)
Packing Authorizations (§173.***)

(8A) Exceptions152see 49 CFR §173.152
(8B) Non-bulk213see 49 CFR §173.213
(8C) Bulk240see 49 CFR §173.240

(9)
Quantity Limits

(9A) Passenger aircraft/rail25 kg
(9B) Cargo aircraft only100 kg

(10)
Vessel stowage

(10A) Location

A

Stowage category “A” means the material may be stowed “on deck” or “under deck” on a cargo vessel or on a passenger vessel.

Source: 49 CFR §172.101(k)

(10B) Other
56Stow “separated from” ammonium compounds.
58Stow “separated from” cyanides.

Source: 49 CFR §176.84


Nitrates, inorganic, n.o.s. #2  
( Comments)

Data from the Hazardous Materials Table

Source: Title 49 CFR 172.101 - Hazardous Materials Table (January 2014)

(3) Hazard Class

5.1
Oxidizers

(4)
Identification number

UN 1477

(5)
Packing Group

II

More than one packing group is indicated for this entry. Criteria for assignment see 49 CFR §173 Subpart D

(6)
Labels

(5.1)

(7)
Special Provisions (§172.102)

Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.

IB8Authorized IBCs: Metal (11A, 11B, 11N, 21A, 21B and 21N); Rigid plastics (11H1, 11H2, 21H1, and 21H2); Composite (11HZ1, 11HZ2, 21HZ1, and 21HZ2); Fiberboard (11G); Wooden (11C, 11D and 11F); Flexible (13H1, 13H2, 13H3, 13H4, 13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2).

[Large packaging authorizations]
IB8Authorized Large Packagings (SOLIDS)
(PG III materials only)2
Inner packagings:Large outer packagings:
Glass 10 kgsteel (50A).
Plastics 50 kgaluminum (50B).
Metal 50 kgmetal other than steel or aluminum (50N).
Paper 50 kgflexible plastics (51H).1
Fiber 50 kgrigid plastics (50H).
mnatural wood (50C).
mplywood (50D).
mreconstituted wood (50F).
mrigid fiberboard (50G).

1Flexible plastic (51H) Large Packagings are only authorized for use with flexible inner packagings.
2Except when authorized under Special Provision 41.

Browse special provision IB8

IP2When IBCs other than metal or rigid plastics IBCs are used, they must be offered for transportation in a closed freight container or a closed transport vehicle.

Browse special provision IP2

IP4Flexible, fiberboard or wooden IBCs must be sift-proof and water-resistant or be fitted with a sift-proof and water-resistant liner.

Browse special provision IP4

T3see 49 CFR §172.102
TP33The portable tank instruction assigned for this substance applies for granular and powdered solids and for solids which are filled and discharged at temperatures above their melting point which are cooled and transported as a solid mass. Solid substances transported or offered for transport above their melting point are authorized for transportation in portable tanks conforming to the provisions of portable tank instruction T4 for solid substances of packing group III or T7 for solid substances of packing group II, unless a tank with more stringent requirements for minimum shell thickness, maximum allowable working pressure, pressure-relief devices or bottom outlets are assigned in which case the more stringent tank instruction and special provisions shall apply. Filling limits must be in accordance with portable tank special provision TP3. Solids meeting the definition of an elevated temperature material must be transported in accordance with the applicable requirements of this subchapter.

Browse special provision TP33

 

(8)
Packing Authorizations (§173.***)

(8A) Exceptions152see 49 CFR §173.152
(8B) Non-bulk212see 49 CFR §173.212
(8C) Bulk240see 49 CFR §173.240

(9)
Quantity Limits

(9A) Passenger aircraft/rail5 kg
(9B) Cargo aircraft only25 kg

(10)
Vessel stowage

(10A) Location

A

Stowage category “A” means the material may be stowed “on deck” or “under deck” on a cargo vessel or on a passenger vessel.

Source: 49 CFR §172.101(k)

(10B) Other
56Stow “separated from” ammonium compounds.
58Stow “separated from” cyanides.

Source: 49 CFR §176.84

Segregation and Separation Chart for Load, Transport, Storage

In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR § 177.848.

Hazard Class
9
8
7
6.1
5.2
5.1
4.3
4.2
4.1
3
2.3B
2.3A
2.2
2.1
1.6
1.5
1.4
1.3
1.1/1.2
1.1/1.2
                   
1.3
                  
1.4
                 
1.5
                
1.6
               
2.1
              
2.2
             
2.3A
            
2.3B
           
3
          
4.1
         
4.2
        
4.3
       
5.1
      
5.2
     
6.1
    
7
   
8
  
9
 

  May not be loaded, transported, or stored together in the same transport vehicle or storage facility.
  Load, transport, storage together is not restricted.
  Load, transport, storage together is allowed under restrictions.










Substances with similar name

UN-NumberNameHazard Class
Nitrates of diazonium compoundsForbidden
UN 3218Nitrates, inorganic, aqueous solution, n.o.s.5.1
UN 1477Nitrates, inorganic, n.o.s.5.1

Discussion

comments powered by Disqus