Allyl bromide


Allyl bromide (3-bromopropene) is an organic halide. It is an alkylating agent used in synthesis of polymers, pharmaceuticals, and other organic compounds. Physically, allyl bromide is a colorless liquid with an intense, acrid, and persistent smell. Allyl bromide is more reactive but more expensive than allyl chloride, and these considerations guide its use. Wikipedia

Substance Data

Source: TOXNET

CAS-Number

106-95-6

Flash Point

n/a

Boiling Point

n/a

Emergency Response Guide No. 131

Data from the Hazardous Materials Table

Source: 49 CFR §172 (2018/07)

(3) Hazard Class

3
Flammable liquids

(4) Identification number Help

UN 1099

(5) Packing Group Help

I

(6) Labels Help

Flammable liquids (3) Poisonous liquids PG I Zone A (6.1) Cargo Aircraft Only (Cargo Aircraft Only)

(7) Special Provisions (§172.102) Help

×Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
T14
TP2
TP13

(8) Packing Authorizations (§173.***) Help

(8A) ExceptionsNone
(8B) Non-bulk201see 49 CFR §173.201
(8C) Bulk243see 49 CFR §173.243

(9) Quantity Limits Help

(9A) Passenger aircraft/railForbidden
(9B) Cargo aircraft only30 L

(10) Vessel stowage Help

(10A) Location
(10B) Other

Segregation Chart for Load, Transport, Storage

In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR §177.848.

red May not be loaded, transported, or stored together in the same transport vehicle or storage facility.
green Load, transport, storage together is not restricted.
yellow Load, transport, storage together is allowed under restrictions.