Engine, internal combustion, flammable gas powered or Engine, fuel cell, flammable gas powered or Machinery, internal combustion, flammable gas powered or Machinery, fuel cell, flammable gas powered
An engine or motor is a machine designed to convert one form of energy into mechanical energy. Heat engines convert heat into work via various thermodynamic processes. The internal combustion engine is perhaps the most common example of a heat engine, in which heat from the combustion of a fuel causes rapid pressurisation of the gaseous combustion products in the combustion chamber, causing them to expand and drive a piston, which turns a crankshaft. Electric motors convert electrical energy into mechanical motion, pneumatic motors use compressed air, and clockwork motors in wind-up toys use elastic energy. Wikipedia
|Emergency Response Guide No. 115|
Data from the Hazardous Materials TableSource: 49 CFR §172 (2018/07)
(3) Hazard Class2.1
(5) Packing Group
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
(9) Quantity Limits
(10) Vessel stowage
Segregation Chart for Load, Transport, Storage
In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR §177.848.
|May not be loaded, transported, or stored together in the same transport vehicle or storage facility.|
|Load, transport, storage together is not restricted.|
|Load, transport, storage together is allowed under restrictions.|