Special provisions may be very complex. The extracts are taken from 49 CFR §172.102
. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
Combination packagings consisting of outer fiber drums or plywood drums, with inner plastic packagings, are not authorized for transportation by aircraft.
Browse special provision A19
Authorized IBCs: Metal (11A, 11B, 11N, 21A,
21B, 21N, 31A, 31B and 31N); Rigid plastics
(11H1, 11H2, 21H1, 21H2, 31H1 and 31H2 );
Composite (11HZ1, 11HZ2, 21HZ1, 21HZ2 and
31HZ1); Fiberboard (11G); Wooden (11C, 11D
and 11F); Flexible (13H1, 13H2, 13H3, 13H4,
13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2).
Browse special provision IB8
Flexible IBCs must be sift-proof and water-
resistant or must be fitted with a sift-
proof and water-resistant liner.
Browse special provision IP3
For UN identification numbers 1327, 1363,
1364, 1365, 1386, 1841, 2211, 2217, 2793 and
3314, IBCs are not required to meet the IBC
performance tests specified in part 178,
subpart N of this subchapter.
Browse special provision IP7