Anisoyl chloride


Anisoyl chloride (also called methoxybenzoyl chloride) is an acyl halide, specifically an aromatic acyl chloride, and may be formed from anisic acid by replacing a hydroxyl group of the carboxylic acid with a chloride group. There are three isomers: the ortho-, meta-, and para- forms. Their structures differ in the arene substitution pattern—the location of the methoxy group on the ring as compared to the acyl halide. Wikipedia

Substance Data

Source: TOXNET

CAS-Number

100-07-2

Flash Point

n/a

Boiling Point

n/a

Emergency Response Guide No. 156

Data from the Hazardous Materials Table

Source: 49 CFR §172 (2018/07)

(3) Hazard Class

8
Corrosive liquids

(4) Identification number Help

UN 1729

(5) Packing Group Help

II

(6) Labels Help

Corrosive liquids (8)

(7) Special Provisions (§172.102) Help

×Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
B2
B4
IB8
IP2
IP4
T3
TP33

(8) Packing Authorizations (§173.***) Help

(8A) Exceptions154see 49 CFR §173.154
(8B) Non-bulk212see 49 CFR §173.212
(8C) Bulk240see 49 CFR §173.240

(9) Quantity Limits Help

(9A) Passenger aircraft/rail15 kg
(9B) Cargo aircraft only50 kg

(10) Vessel stowage Help

(10A) Location
(10B) Other

Segregation Chart for Load, Transport, Storage

In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR §177.848.

red May not be loaded, transported, or stored together in the same transport vehicle or storage facility.
green Load, transport, storage together is not restricted.
yellow Load, transport, storage together is allowed under restrictions.