Note: The HMR prohibit only those Division 6.1 liquids that meet the definition of a Packing Group (PG) I and Hazard Zone A. See special provision 1 and PHMSA Interpretation #09-0252.

Packages with POISON or POISON INHALATION HAZARD labels, or a POISON label displaying “PG III,” or “PG III” marked next to a POISON label may not be transported with foodstuffs, feed or any other edible material, intended for humans or animals. For exceptions see 49 CFR §177.841(e).

Scope & sources (important)Click to show CFR references

This check evaluates segregation per 49 CFR §177.848. Additional loading/unloading and handling requirements may still apply; see 49 CFR §177 Subpart B (Loading and Unloading):

§177.834 - General requirements
§177.835 - Class 1 materials
§177.837 - Class 3 materials
§177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic liquid) materials
§177.839 - Class 8 (corrosive) materials
§177.840 - Class 2 (gases) materials
§177.841 - Division 6.1 and Division 2.3 materials
§177.842 - Class 7 (radioactive) material
§177.843 - Contamination of vehicles

Similar substances

UN / ID	Proper shipping name	Hazard class
UN 3508	Capacitor, asymmetric with an energy storage capacity greater than 0.3 Wh	9
UN 1163	Dimethylhydrazine, unsymmetrical	6.1
UN 2382	Dimethylhydrazine, symmetrical	6.1

Dichlorodimethyl ether, symmetrical

Dichlorodimethyl ether, symmetrical

Substance Data

CAS-Number

Flash Point

Boiling Point

Hazardous Materials Table

(3) Hazard Class

(4) Identification number

(5) Packing Group

(6) Labels

(7) Special Provisions (§172.102)

(8) Packing Authorizations (§173.***)

(9) Quantity Limits

(10) Vessel stowage

Segregation chart for load, transport, and storage

Similar substances