Methyldichlorosilane

Single packagings are not permitted on aircraft.

Browse special provision A2

Steel packagings must be corrosion-resistant or have protection against corrosion.

Browse special provision A7

Packagings shall be made of steel.

Browse special provision B6

Other packaging are authorized when approved by the Associate Administrator.

Browse special provision B77

Aluminum construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material.

Browse special provision N34

a. The maximum degree of filling must not exceed the degree of filling determined by the following:

Where:
t_r is the maximum mean bulk temperature during transport,
t_f is the temperature in degrees celsius of the liquid during filling, and
α is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (t_f) and the maximum mean bulk temperature during transportation (t_r) both in degrees celsius.
b. For liquids transported under ambient conditions α may be calculated using the formula:

Where:
d₁₅ and d₅₀ are the densities (in units of mass per unit volume) of the liquid at 15 °C (59 °F) and 50 °C (122 °F), respectively.

Browse special provision TP2

The vapor space must be purged of air by nitrogen or other means.

Browse special provision TP7

Self-contained breathing apparatus must be provided when this hazardous material is transported by sea.

Browse special provision TP13

Non-bulk packagings must be hermetically sealed.

Browse special provision W31

D

Stowage category “D” means the material must be stowed “on deck only” on a cargo vessel or on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers or one passenger per each 3 m of overall vessel length, but the material is prohibited on a passenger vessel in which the limiting number of passengers is exceeded.

Source: 49 CFR §172.101(k)