Phenol, molten


Phenol is an aromatic organic compound with the molecular formula C6H5OH. It is a white crystalline solid that is volatile. The molecule consists of a phenyl group (−C6H5) bonded to a hydroxy group (−OH). It is mildly acidic and requires careful handling due to its propensity to cause chemical burns. Phenol was first extracted from coal tar, but today is produced on a large scale (about 7 billion kg/year) from petroleum. Wikipedia

Substance Data

Source: TOXNET (HSDB, 23.01.2019)

CAS-Number

108-95-2

Flash Point

n/a

Boiling Point

n/a

Emergency Response Guide No. 153

Data from the Hazardous Materials Table

Source: 49 CFR §172 (2018/07)

(3) Hazard Class

6.1
Poisonous Material

(4) Identification number Help

UN 2312

(5) Packing Group Help

II

(6) Labels Help

Poisonous liquids PG I Zone A (6.1)

(7) Special Provisions (§172.102) Help

×Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
B14
T7
TP3

(8) Packing Authorizations (§173.***) Help

(8A) ExceptionsNone
(8B) Non-bulk202see 49 CFR §173.202
(8C) Bulk243see 49 CFR §173.243

(9) Quantity Limits Help

(9A) Passenger aircraft/railForbidden
(9B) Cargo aircraft onlyForbidden

(10) Vessel stowage Help

(10A) Location
(10B) Other

Segregation Chart for Load, Transport, Storage

In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR §177.848.

There are no restrictions with hazardous materials, as pointed out in the instructions for using the Segregation Table (see 49 CFR §177.848(e)). But please, refer to following requirements in 49 CFR §177 Subpart B (Loading and Unloading):
  • §177.834 - General requirements
  • §177.835 - Class 1 materials
  • §177.837 - Class 3 materials
  • §177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic liquid) materials.
  • §177.839 - Class 8 (corrosive) materials
  • §177.840 - Class 2 (gases) materials
  • §177.841 - Division 6.1 and Division 2.3 materials
  • §177.842 - Class 7 (radioactive) material
  • §177.843 - Contamination of vehicles.