Zinc phosphide


Zinc phosphide (Zn3P2) is an inorganic chemical compound. It is a grey solid, although commercial samples are often dark or even black. It is used as a rodenticide. Zn3P2 is a semiconductor with a direct band gap of 1.5 eV and may have applications in photovoltaic cells. Wikipedia

Substance Data

Source: TOXNET (HSDB, 28.03.2019)

CAS-Number

1314-84-7

Flash Point

n/a

Boiling Point

1,100 ° C

Emergency Response Guide No. 139

Data from the Hazardous Materials Table

Source: 49 CFR §172 (2018/07)

(3) Hazard Class

4.3
Dangerous when wet materials

(4) Identification number Help

UN 1714

(5) Packing Group Help

I

(6) Labels Help

Dangerous when wet materials (4.3) Poisonous liquids PG I Zone A (6.1) Cargo Aircraft Only (Cargo Aircraft Only)

(7) Special Provisions (§172.102) Help

×Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.
A19
N40
W32

(8) Packing Authorizations (§173.***) Help

(8A) ExceptionsNone
(8B) Non-bulk211see 49 CFR §173.211
(8C) BulkNone

(9) Quantity Limits Help

(9A) Passenger aircraft/railForbidden
(9B) Cargo aircraft only15 kg

(10) Vessel stowage Help

(10A) Location
(10B) Other

Segregation Chart for Load, Transport, Storage

In this table a statement is contained for each hazard class whether the loading, transport or storage with other hazard classes is allowed, is not permitted or is restricted. The table is based on U.S.-Code 49 CFR §177.848.

red May not be loaded, transported, or stored together in the same transport vehicle or storage facility.
green Load, transport, storage together is not restricted.
yellow Load, transport, storage together is allowed under restrictions.