HazMat Tool — substance information Reference only — not a shipping paper, placard mandate, or CVI record.

Seed cake with more than 1.5 percent oil and not more than 11 percent moisture

HMT 15 June 2026

UN / ID: UN 1386
Hazard class: 4.2
Packing group: III (multiple — see tabs)
ERG guide: ERG 135
Special provisions: SP B136, SP IB8, SP IP3, SP IP7, SP N7
Source: 49 CFR §172 (15 June 2026)

On this page

Seed cake with more than 1.5 percent oil and not more than 11 percent moisture

In botany, a seed is a plant structure containing an embryo and stored nutrients in a protective coat called a testa. More generally, the term seed means anything that can be sown, which may include seed and husk or tuber. Seeds are the product of the ripened ovule, after the embryo sac is fertilized by sperm from pollen, forming a zygote. The embryo within a seed develops from the zygote and grows within the mother plant to a certain size before growth is halted Wikipedia

Emergency Response Guide No. 135

Hazardous Materials Table

Source: 49 CFR §172 (15 June 2026)

Packing group III
Packing group

(3) Hazard class

4.2
Spontaneously combustible materials

(4) Identification number

UN 1386

(5) Packing Group

III

Comparison View of PG

(6) Labels

None

(1) Symbols

This entry is signed with "I". The letter "I" identifies proper shipping names which are appropriate for describing materials in international transportation. An alternate proper shipping name may be selected when only domestic transportation is involved.

(7) Special Provisions (§172.102)

×Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.

B136	Non-specification closed bulk bins are authorized. Browse special provision B136
IB8	_{Authorized IBCs:} Metal (11A, 11B, 11N, 21A, 21B, 21N, 31A, 31B and 31N); Rigid plastics (11H1, 11H2, 21H1, 21H2, 31H1 and 31H2 ); Composite (11HZ1, 11HZ2, 21HZ1, 21HZ2 and 31HZ1); Fiberboard (11G); Wooden (11C, 11D and 11F); Flexible (13H1, 13H2, 13H3, 13H4, 13H5, 13L1, 13L2, 13L3, 13L4, 13M1 or 13M2). Browse special provision IB8
IP3	Flexible IBCs must be sift-proof and water-resistant or must be fitted with a sift-proof and water-resistant liner. Browse special provision IP3
IP7	For UN identification numbers 1327, 1363, 1364, 1365, 1386, 1408, 1841, 2211, 2217, 2793 and 3314, IBCs are not required to meet the IBC performance tests specified in part 178, subpart N, of this subchapter. Browse special provision IP7
N7	The hazard class or division number of the material must be marked on the package in accordance with § 172.302 of this subchapter. However, the hazard label corresponding to the hazard class or division may be substituted for the marking. Browse special provision N7

(8) Packing Authorizations (§173.***)

(8A) Exceptions	None
(8B) Non-bulk	213	see 49 CFR §173.213
(8C) Bulk	241	see 49 CFR §173.241

(9) Quantity Limits

(9A) Passenger aircraft/rail	Forbidden
(9B) Cargo aircraft only	Forbidden

(10) Vessel stowage

(10A) Location

Stowage category “E” means the material may be stowed “on deck” or “under deck” on a cargo vessel or on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length, but is prohibited from carriage on a passenger vessel in which the limiting number of passengers is exceeded.

Source: 49 CFR §172.101(k)

(10B) Other

13	see 49 CFR §176.84
25	see 49 CFR §176.84

Source: 49 CFR §176.84