HazMat Tool — substance information

Sodium aluminum hydride

HMT 15 June 2026

UN / ID: UN 2835
Hazard class: 4.3
Packing group: II
ERG guide: ERG 138
Special provisions: SP A8, SP A19, SP A20, SP IB4, SP T3, SP TP33, SP W31, SP W40
Source: 49 CFR §172 (15 June 2026)

On this page

Sodium aluminum hydride

Sodium aluminium hydride or sodium alanate is an inorganic compound with the chemical formula NaAlH4. It is a white solid that dissolves in tetrahydrofuran (THF), but not in diethyl ether or hydrocarbons. It has been evaluated as an agent for the reversible storage of hydrogen and it is used as a reagent for the chemical synthesis of organic compounds. Similar to lithium aluminium hydride, it is a salt consisting of separated sodium cations and tetrahedral AlH−4 anions Wikipedia

Substance Data

Source: PubChem (HSDB, 28.11.2019)

CAS-Number

13770-96-2

Flash Point

n/a

Boiling Point

n/a

Emergency Response Guide No. 138

Hazardous Materials Table

Source: 49 CFR §172 (15 June 2026)

(3) Hazard Class

4.3
Dangerous when wet materials

(4) Identification number

UN 2835

(5) Packing Group

(6) Labels

Cargo Aircraft Only (Cargo Aircraft Only)

(7) Special Provisions (§172.102)

×Note:
Special provisions may be very complex. The extracts are taken from 49 CFR §172.102. Please be careful with the information, as necessary, additional conditions may be applied that are not written here. Please check the original source and report bugs.

For combination packagings, if glass inner packagings (including ampoules) are used, they must be packed with cushioning material in tightly closed metal receptacles before packing in outer packagings.

Browse special provision A8

A19

Combination packagings consisting of outer fiber drums or plywood drums, with inner plastic packagings, are not authorized for transportation by aircraft.

Browse special provision A19

A20

Plastic bags as inner receptacles of combination packagings are not authorized for transportation by aircraft.

Browse special provision A20

IB4

_{Authorized IBCs:} Metal (11A, 11B, 11N, 21A, 21B, 21N, 31A, 31B and 31N).

Browse special provision IB4

Minimum test pressure (bar)	2.65
Minimum shell thickness	§ 178.274(d)(2)
Pressure-relief requirements	Normal
Bottom opening requirements	§ 178.275(d)(2)

Browse special provision T3

TP33

The portable tank instruction assigned for this substance applies for granular and powdered solids and for solids which are filled and discharged at temperatures above their melting point which are cooled and transported as a solid mass. Solid substances transported or offered for transport above their melting point are authorized for transportation in portable tanks conforming to the provisions of portable tank instruction T4 for solid substances of packing group III or T7 for solid substances of packing group II, unless a tank with more stringent requirements for minimum shell thickness, maximum allowable working pressure, pressure-relief devices or bottom outlets are assigned in which case the more stringent tank instruction and special provisions shall apply. Filling limits must be in accordance with portable tank special provision TP3. Solids meeting the definition of an elevated temperature material must be transported in accordance with the applicable requirements of this subchapter.

Browse special provision TP33

W31

Non-bulk packagings must be hermetically sealed.

Browse special provision W31

W40

Non-bulk bags are not allowed.

Browse special provision W40

(8) Packing Authorizations (§173.***)

(8A) Exceptions	151	see 49 CFR §173.151
(8B) Non-bulk	212	see 49 CFR §173.212
(8C) Bulk	242	see 49 CFR §173.242

(9) Quantity Limits

(9A) Passenger aircraft/rail	Forbidden
(9B) Cargo aircraft only	50 kg

(10) Vessel stowage

(10A) Location

Stowage category “E” means the material may be stowed “on deck” or “under deck” on a cargo vessel or on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length, but is prohibited from carriage on a passenger vessel in which the limiting number of passengers is exceeded.

Source: 49 CFR §172.101(k)

(10B) Other

13	see 49 CFR §176.84
52	see 49 CFR §176.84
148	see 49 CFR §176.84

Source: 49 CFR §176.84

Segregation chart for load, transport, and storage

This chart shows whether loading, transport, or storage with other hazard classes is permitted, prohibited, or restricted. Based on 49 CFR §177.848.

Hazard class	8	7	6.1	5.2	5.1	4.3	4.2	4.1	3	2.3B	2.3A	2.2	2.1	1.6	1.5	1.4	1.3	1.1/1.2
1.1/1.2
1.3
1.4
1.5
1.6
2.1
2.2
2.3A
2.3B
3
4.1
4.2
4.3
5.1
5.2
6.1
7
8

	Must not be loaded, transported, or stored together in the same vehicle or facility.
	May be loaded, transported, or stored together.
	May be loaded, transported, or stored together only with restrictions.

Similar substances

UN / ID	Proper shipping name	Hazard class
UN 2870	Aluminum borohydride or Aluminum borohydride in devices	4.2
UN 3170	Aluminum smelting by-products or Aluminum remelting by-products	4.3
UN 1411	Lithium aluminum hydride, ethereal	4.3
	Aluminum dross, wet or hot	Forbidden
UN 1398	Aluminum silicon powder, uncoated	4.3
UN 1410	Lithium aluminum hydride	4.3
UN 1725	Aluminum bromide, anhydrous	8
UN 2580	Aluminum bromide, solution	8
UN 1726	Aluminum chloride, anhydrous	8
UN 2581	Aluminum chloride, solution	8
UN 1395	Aluminum ferrosilicon powder	4.3
UN 3048	Aluminum phosphide pesticides	6.1
UN 1309	Aluminum powder, coated	4.1
UN 1396	Aluminum powder, uncoated	4.3
NA 9260	Aluminum, molten	9